Brother laser printers are known for their reliability, speed, and quality. However, over time, you may experience a decline in print quality, including issues like faded prints, streaks, or smudges. These problems can occur due to a variety of reasons, such as low toner levels, dirty components, or incorrect settings. Fortunately, there are several steps you can take to enhance the print quality and restore your printer’s performance. In this guide, we’ll walk you through how to improve the print quality on your Brother laser printer.
Common Print Quality Issues
Before we dive into solutions, it’s helpful to understand the typical print quality problems you might encounter:
Faded prints:
Light or incomplete prints where the text or images appear faint.
Streaks or smudges:
Horizontal or vertical lines, or ink blotches on the paper.
Uneven print density:
Parts of the print may appear darker or lighter than others.
Dots or specks:
Small, unwanted dots of toner scattered on the page.
Wrinkled paper:
Paper that comes out crumpled or with creases after printing.
Step-by-Step Solutions to Improve Print Quality
1. Check and Replace the Toner Cartridge
A common cause of poor print quality is a low or empty toner cartridge. If the toner is running low, you may experience faded prints or uneven text and images. Here’s how to check and replace the toner:
Check toner levels: On many Brother laser printers, you can check toner levels directly from the printer’s control panel or through the Brother software installed on your computer.
Shake the toner cartridge: If your toner cartridge is running low but you’re not ready to replace it, you can remove the cartridge and gently shake it from side to side. This can redistribute the toner and improve print quality temporarily.
Replace the toner: If shaking the toner doesn’t help or if the toner is empty, replace it with a new Brother toner cartridge. Always use a compatible or genuine Brother toner to ensure the best print quality.
2. Clean the Drum Unit
The drum unit plays a vital role in the printing process by transferring toner to the paper. Over time, the drum unit can accumulate dust, debris, or excess toner, leading to streaks, smudges, and other print defects. Cleaning the drum unit can significantly improve print quality.
Remove the drum unit: Turn off the printer and carefully remove the drum unit following the instructions in the user manual.
Clean the drum unit: Use a dry, lint-free cloth to wipe the drum unit gently. Avoid touching the drum surface with your fingers, as oils from your skin can damage it.
Replace the drum unit: Brother laser printers require a drum replacement after a certain number of pages. If cleaning doesn’t improve the print quality, it may be time to replace the drum unit.
3. Adjust Print Settings
Incorrect print settings can result in poor print quality, especially when printing high-resolution images or graphics. Adjusting the print settings can help enhance the quality of your prints.
Check the print resolution: In the print settings of your Brother printer driver, select a higher resolution for better quality prints. Keep in mind that higher resolutions may use more toner.
Choose the appropriate paper type: Ensure that the printer settings match the type of paper you are using (e.g., plain paper, glossy paper, envelopes). Incorrect paper settings can lead to smudging or paper jams.
Enable toner save mode: If toner save mode is enabled, it may reduce the print quality to conserve toner. Disable this option if you’re aiming for better print quality.
4. Clean the Corona Wire
The corona wire in your Brother laser printer helps ensure that the toner is applied evenly to the paper. If the corona wire is dirty, it can result in streaks or patches on the printed pages.
Open the front cover: Access the toner and drum unit by opening the front cover of the printer.
Slide the corona wire cleaner: Look for the corona wire cleaner (usually a green or blue tab) located on the drum unit. To clean the wire, slide it back and forth multiple times.
Return the cleaner to its original position: Make sure the cleaner is returned to its original position after cleaning.
5. Use High-Quality Paper
The quality of paper you use can also affect print quality. Low-quality or incorrect paper types may lead to smudges, jams, and uneven prints.
Choose the right paper type: Ensure that you are using paper that is suitable for laser printers. High-quality paper designed for laser printing can improve both the appearance and durability of your prints.
Check paper storage conditions: Paper should be stored in a cool, dry place to avoid moisture absorption, which can cause wrinkling or smudging during printing.
6. Perform a Printer Calibration
If your Brother laser printer is producing uneven prints, performing a calibration can help balance the toner distribution and improve print quality.
Access the printer settings: Navigate to the control panel on your Brother printer or use the Brother printer software on your computer.
Run a calibration: Look for an option to run a printer calibration.
7. Check for Firmware Updates
Firmware updates for your printer can address bugs and improve overall functionality, including print quality.
Check for updates: Visit the Brother website and enter your printer model to check for any available firmware updates.
Install updates: Follow the instructions on the Brother support page to download and install the latest firmware for your printer.
FAQs
1. Why are my prints coming out faded?
Faded prints are often caused by a low toner cartridge. Check your toner levels and replace the cartridge if necessary. Other causes could include dirty components like the drum unit or a clogged corona wire.
2. Why do I see streaks or smudges on my printed pages?
Streaks and smudges can result from a dirty drum unit, a dirty corona wire, or incorrect print settings. Clean these components and ensure that your print settings are configured correctly.
3. How often should I replace the drum unit on my Brother laser printer?
The drum unit typically needs to be replaced after 10,000 to 15,000 pages, but this can vary depending on your printer model. You can check the drum life status through the printer’s control panel.
4. Can using non-Brother toner cartridges affect print quality?
Yes, using third-party or incompatible toner cartridges can result in poor print quality and may even damage your printer. It’s recommended to use genuine Brother toner cartridges for the best performance.
5. What should I do if my printer still produces poor quality prints after cleaning?
If cleaning the drum, corona wire, and adjusting settings doesn’t solve the issue, it may be time to replace the drum unit or toner cartridge. For additional help, get in touch with Brother support if the issue continues.
Conclusion
Improving the print quality on your Brother laser printer is often a matter of regular maintenance and ensuring the right settings are applied. By checking toner levels, cleaning the drum unit and corona wire, adjusting print settings, and using high-quality paper, you can significantly enhance your printer’s performance. If issues persist after these steps, replacing key components like the toner cartridge or drum unit may be necessary to restore optimal print quality.