An Effective Solution Provider for HP Printer Symbols Error

On your HP printer, there are a number of buttons, and if something goes wrong, then it is indicated through lights. Many times, most users fail to evaluate the reasons behind the glowing of light. It clearly indicates that an error has occurred but they have a hard time scrutinizing and then fixing it. So, we are here to lend you a helping hand with information about HP Printer Symbols Error and discuss the possible ways of resolving it with optimum solutions. 

Different Symbols on HP Printer and their importance 

You can find different types of light on your HP printer. Let us discuss the meaning of HP printer ink symbols if the lights blink.

1. Wireless Light 

The blinking of the wireless light designates the following:

• Your HP printer is unable to find the wireless signal
• It is taking extra time in configuring a connection
• Your HP printer is struggling hard in connecting to the network

2. Attention Light 

If HP printer users are encountering any type of error then it will be communicated to them through the attention light. Besides blinking when a two-sided print job is sent, it also blinks when users are facing either of the below errors:

• Out of paper 

If your HP printer is running out of paper then you can try the following options:

Checking the paper and then reloading a new one:

If your HP printer paper is torn, bent or damp then you are advised to use a new sheet. You should ensure that the dimensions of the new paper are compatible with your HP printer. Next, you are supposed to align the edges of the paper sheet with the help of an even surface and then insert it into the paper tray of your HP printer.

Checking the Back-Panel Cover of your HP Printer

There might be a probability that the back panel of your HP printer is out of order. If it is not properly closed then there should be some jammed paper inside. If this happens then you should take off the back panel completely, clear the wrinkled paper and then place the panel back on your HP printer.

Resetting your HP Printer

Firstly, you should unplug the power cable directly without turning off your HP printer. Now, you should wait for a while before plugging it back into your HP printer. If your HP printer fails to turn on automatically then you should try it by pressing its manual power button.

Dusting the Rollers of the Printer

In case, if dust has accumulated on the rollers of your HP printer then it leads to paper feed issues. Therefore, you are supposed to clean it and then turn off your HP printer and then unplug its power source. Now, you should use a piece of lint-free cloth and fresh water to clean it properly. After successfully cleaning the rollers of your HP printer, you should leave it for drying before putting it back. Once it is cleaned properly then you can easily plug back the power cable and turn on your HP printer.

Front Door Open 

If you are facing this error then you are advised to try the following ways to troubleshoot it:

Checking the cartridge door for barrier

Firstly, you should look at the door and the area around it to ensure that there is no obstruction in and around the door as it could stop it from closing suitably.

Now, you should remove the block and then close the cartridge access door again and look for the error message on the control panel of your HP printer.

Restarting the Print Spool Device

You should try restarting the Print Spool Device by following the below-mentioned steps: –

1. Firstly, you should switch off your HP printer
2. Now, you should open the Control Panel and then go to Performance and Maintenance.
3. Next, you should open the Administrative Tools, and then select Print Spooler, and, then right-click on it
4. Thereafter, you should click Stop and then select ‘Start’ to restart the Print Spooler
5. Finally, you should click OK and restart your laptop and printer
6. Paper jam indication 

In order to fix this issue, you are supposed to follow the below-mentioned steps:

Clearing the jam from outside

You can easily clear the jam from outside by cleaning

1. Input and output trays- They are trays for inserting the fresh sheet and taking out the printouts
2. ADF- You should open it to clean any leftover sheet

Clearing the jam from inside

To begin with, you should turn off your HP printer and then disconnect it from the power source. Now, you are advised to remove the jammed paper from the following areas:

1.  Toner or ink cartridge area- You should open the access door, move the carriage, and then remove any jammed paper.
2.  Under the paper path
3.  Input tray
4.  Bottom cleanout door
5.  Rear access door
6. Paper size issue
7. Unauthorized toner/ drum

3. Attention and Toner supply light 

Every time, the attention light and toner supply light blinks together, it implies that you are facing either of the below errors:

• Drum or toner missing
• Installation of HP-protected toner or drum
• Cartridge error
• Incompatible toner or drum
• Unauthorized drum or toner

4. Attention and ready lights 

Every time, the attention and ready lights blink together then it implies that you are facing a fatal error state.

5. All lights off 

Whenever you see no lights on the control panel then it means that:

• Your HP printer is off
• Any type of issue with the power supply

If you are facing any of these HP Printer Symbols Error or any other HP printer errors then feel free to contact us and we will help you in resolving these errors with the best possible solutions.