How to Replace the Imaging Unit in My Lexmark Printer?
Do you want to learn how to replace the imaging unit in your Lexmark printer? If so, you’ve come to the correct place because you’ll learn everything you need to know about replacing your printer’s imaging unit right here. So, let’s get this party started.
How to Change the Imaging Unit in a Lexmark Printer
The processes for replacing the image unit in your Lexmark printer are outlined below.
Step 1: Lift the front cover and then take down the multipurpose feeding door.
Step 2: Using the handle, remove the toner cartridge from your printer.
Step 3: Remove the image unit from your printer by lifting the green handle.
Step 4: Remove the new imaging unit and shake it vigorously.
How Do I Reset the Lexmark Printer’s Imaging Unit?
Procedure for resetting the PC counter.
Step 1: Make sure your printer is turned on before opening the front door.
Step 2: Press and hold the cancel button. After a while, the printer will blink an indicator light to let you know that it is resetting the counter.
Step 3: Lock the front door.
Step 4: Your printer will then resume automatically.
How Can I Make My Lexmark Printer Recognize Refilled Ink Cartridges?
The methods to make your Lexmark printer recognize refilled ink cartridges are outlined below.
Step 1: Insert the genuine working cartridge into your printer.
Step 2: Finally, switch off your printer.
Step 3: Once your printer has been turned off, open the lid and remove the toner cartridge.
Step 4: Replace your old toner cartridge with your new Lexmark toner cartridge.
Step 5: Turn your printer back on.